From GnuCash
Jump to: navigation, search
Languages עברית

Internet Relay Chat (IRC) is a form of instant communication over the Internet. It is used for GnuCash to enable group (many-to-many) communication in a discussion forum, called channel. IRC in itself additionally also allows one-to-one communication.

For more complex questions or if you can not stay longer online better use one of our Mailing Lists.


IRC Client

At first you need a program which supports the IRC protocol. Many IRC and multi-protocoll clients exist. Probably one is already on your computer or smartphone. If you find one neither on your computer nor on your installation media, see the following lists:
future proof IRCv3 clients
partially outdated:


At least one version of Mozilla Thunderbird has by default strange settings, again and again reconnecting after a few minutes. So please adjust the settings and feel free to report the adjustments here.

Non ASCII characters
To get the right presentation of non ASCII characters like umlauts or accents, you should set the encoding of your client to UTF-8 instead of e.g. Latin/Hybrid. Otherwise the log files might look ugly.


For historical reasons there are several IRC networks. The official GnuCash channel is on the network named GIMPNet. Its server name is as it it used by many GTK+ based appplications. Depending on the client you are using, you will have to enter either the network name or a server address.

Since end of November 2022
The Gnome infrastructure team has changed the alias for from to That means that the #gnucash IRC channel on Libera Chat (aka is not the one monitored by the GnuCash team.
Communication targets
In a normal chat window
commands to your client or a server
are prefixed by / (Slash) and
commands to our gncbot
by @ (At).
Other text
is sent to the channel.


Any IRC application first needs to connect to an IRC server. The discussion forum for GnuCash is hosted on the following server and has the following channel name:


In many IRC applications you will be asked to specify the server to connect to. Choose in that dialog. After that, your IRC application might have a input field labeled Join Channel, in which you can specify to join the #gnucash channel.

Alternatively, you can perform these two steps by entering the following commands at the command prompt of an IRC application:
/server []
/join #gnucash

If your computer had a correct setup of MIME types and applications, all you would have to do is click on: irc:// Now you can 'listen' to the channel.

Sometimes IRC servers are under attack by spammers. Then we are forced to restrict the rights. To get a voice on the channel then you need to use a registered nickname.

Register a Nick

This has to be done only once:
# connect with the server:

# If not already set in your client:
/nick <your desired nickname>
# If you get a warning like 'This nickname is registered and protected...' choose another name.

# Register your nick:
/msg NickServ register <password> <email>

# Follow the instructions; confirm the code the server should have emailed to you:
/msg NickServ confirm <code>

# Only, if you already joined, and do not get "voice" automatically upon registration, leave and rejoin the gnucash channel:
/part #gnucash
/join #gnucash

If you have mistyped your e-mail address, you must repeat the registration with the correct one.


On the start of each later session you will have to identify:
/msg nickserv identify [<nick>] <password>
/join #gnucash

The nick in the identfy command is only needed, if the registered nick different from the current nick.

you can store your nick and password in the configuration of most IRC clients. So they can do the procedure on behalf of you in future sessions.

Quit IRC

To quit IRC, just execute:
Note for information
Unless you have used Chat programs before it is not very simple or intuitive to use them. I have tried a number of the programs mentioned above and the only one that worked and was relatively easy to use was Mibbit. Once downloaded you click on the chat now button and you get the home screen, you then need to click on server (because the server is not in the list) and enter, then choose a nickname to use (this can probably be anything), then enter #gnucash in the channel box and then click connect and wait. You should then be connected and can type your question or comment in the box at the bottom and it should appear on the main screen when you press enter, and then wait for an answer. Hope this is helpful.
User:Chrisardy 2014-04-17

Public Logging

The discussions in the GnuCash irc channel are logged on a public web page:

The timestamps in the log pages are given in EST (UTC-5).

If you want to say something that shouldn't be logged, prepend your text by the prefix [off] which should stand for "off-the-record". Lines that begin with [off] will not show up on the web page logs.

The brackets are part of the command.

How to speak up in the channel

When you join the GnuCash IRC channel, you should speak up.

If you have a question, please ask it right away.
But then you should wait. Don't expect an answer right away. Sometimes you'll get an answer within seconds. Other times you might have to wait several hours until one of the core developers wakes up. Please be kind, and please wait in the channel.
Note that many of the active participants in that channel are active only during US daylight time, corresponding to timezones EST (UTC-5), CST (UTC-6), PST (UTC-8). Other participants are active only during Europe daylight time, GMT (UTC+0) and CET (UTC+1).
If you got disconnected, review the logs for meanwhile answers.
If someone asked you for further details and you do not answer immediately, insert that persons nick into your answer to draw their attention.

Use pastebin for longer text and imagebin for screenshots

Sometimes you will be asked to show your console output or a trace file. Please do not use copy&paste in the chat window for this longer texts. Instead call a pastebin like or in your web browser, paste the text in the offered input window and push Submit. Then copy the returned link into your chat client to provide it to your chat partners.

If you wish to share a screenshot, use a service like


We run an instance of Supybot named gncbot on the channel. It provides the #Public Logging facility noted earlier and some other useful features. For a list of available modules say
/msg gncbot list
The commands in a module can be obtained with
/msg gncbot list module_name
And a description of a particular command with
/msg gncbot help command
Instead of repeating /msg gncbot again and again, you can also start a private session with the bot with
/query gncbot
Commands are issued by prefacing the command with '@' at the beginning of the line. For example
@tell foo bar

Will save the message "bar" for nick "foo" and play it back the next time "foo" says something in the channel. A side effect of this is that attempting to use the common "@foo" to address a post to user foo will produce an error about an unrecognized command.

Supybot is not terribly smart about nicks so "foo", "foo:", and "foo," are different. "foo:" or "foo," isn't a legal nick but that won't stop gncbot from saving a message for it. Remember not to use punctuation after the nick when creating an @tell message. Note as well that one can @tell only one nick at a time.
To seen and remove messages for "mistyped-nick" use
@notes mistyped-nick

Ban and Unban

There are rare cases, where we ban users because they do no follow above rules. The most common case is because you spammed the channel by alternating disconnect and reconnect messages.

After you fixed your #Settings or whatever the cause was,

  1. choose a temporary nick,
  2. join the channel,
  3. ask the operators to unban your original nick,
  4. after they confirmed you can use your original nick again.

Further Reading

You can find much information around IRC at As the IRC standard is ancient most networks have developed their own extensions. So for details refer their online help.

NickServ Help

/msg NickServ help
will return a text like
NickServ allows you to register a nickname and prevent others from using it. The following commands allow for registration and maintenance of nicknames; to use them, type
/msg NickServ command.

For more information on a specific command, type
/msg NickServ HELP command.
     CONFIRM        Confirm a passcode
     GROUP          Join a group
     HELP           Displays this list and give information about commands
     IDENTIFY       Identify yourself with your password
     INFO           Displays information about a given nickname
     RECOVER        Regains control of your nick
     REGISTER       Register a nickname
     RESETPASS      Helps you reset lost passwords
     STATUS         Returns the owner status of the given nickname
Accounts that are not used anymore are subject to the automatic expiration, i.e. they will be deleted after 600 days if not used.
/msg NickServ help register
will return a text like
Syntax: REGISTER password email

Registers your nickname in the NickServ database. Once your nick is registered, you can use the SET and ACCESS commands to configure your nick's settings as you like them. Make sure you remember the password you use when registering - you'll need it to make changes to your nick later. (Note that case matters! ANOPE, Anope, and anope are all different passwords!)

Guidelines on choosing passwords:
Passwords should not be easily guessable. For example, using your real name as a password is a bad idea. Using your nickname as a password is a much worse idea ;) and, in fact, NickServ will not allow it. Also, short passwords are vulnerable to trial-and-error searches, so you should choose a password at least 5 characters long.
Finally, the space character cannot be used in passwords.

This command also creates a new group for your nickname, that will allow you to register other nicks later sharing the same configuration, the same set of memos and the same channel privileges.