MacOS/Quartz

From GnuCash
Revision as of 21:42, 2 April 2018 by Jralls (talk | contribs) (Downloads: Update versions for release of 3.0 and 2.6.20.)
Jump to: navigation, search

Downloads

Gnucash-Intel-3.0, Gnucash-Intel-2.6.20 and Gnucash-PPC-2.6.20 are now available as binary downloads from the Gnucash project at Sourceforge. Release notes are included in the disk-image. GnuCash 2.6.20 is the last version that supports MacOS X 10.8 and earlier, and so the last version that will run on PowerPC Macs. MacOSX 10.9 (Mavericks) or higher is required to run Gnucash-3.0 and later. For virtually all users it is more appropriate to download the binary rather than to use the procedure described here.

Overview

GnuCash can be built to run more or less natively on OSX -- meaning without X11. Better yet, the build is almost automatic.

This page describes the procedure to build GnuCash with the Quartz environment. You can also use MacPorts: The details are described at MacOSX/MacPortsDetail. If you already have MacPorts installed, you should use that procedure, as gtk-osx doesn't work well with a MacPorts installation.

If you want to have a clickable GnuCash.app to put in your Applications folder, this is the solution to use. If you want to be able to easily customize your installation, this is also the solution for you. Don't want all of the extra stuff that MacPorts drags in? Well, this might be a bit better... but GnuCash is notorious for its huge list of dependencies. Want to keep up with the latest work from the Gnome developers? You can set up this solution to get many of its packages directly from source-code-control. That's a double-edged sword, of course, because if a build gets broken, you're pretty well stuck until the developers for that package fix it.

A build will consume about 5 gigabytes of disk space and typically take several hours to run. The initial build, which includes pulling down sources from all dependencies, can take days, depending on how often network errors interrupt the process, and how quickly they are noticed.

This build now integrates Gnucash menus with the mac menubar at the top of the screen. About, Preferences, and Quit are in the "GnuCash" menu (it's named "gnucash-bin" when you run from the command line) in standard Mac style. Standard accelerator keys like Command-Q (quit), Command-S (save), and Command-O (Open) now work as well. A patch to Gtk+ now allows copy and paste in the register pages.

Support

This procedure depends on the Gnome Gtk-OSX project. Support for that is provided via the gtk-osx-users-list@gnome.org mailing list. Questions, comments, or suggestions about Gnucash should be directed to the appropriate Gnucash mailing list (gnucash-devel for development versions (2.7.x, git master) or gnucash-user for release versions (2.6.x).)

Preliminaries

Read Building Gtk-OSX and scan the jhbuild docs. This procedure is based on both. Note well the warnings about Homebrew, MacPorts, and Fink! Creating a separate user for building and packaging GnuCash is the easiest work-around if you've used any of those systems in your regular userid.

First download gtk-osx-build-setup.sh by clicking the link or from the commandline:

curl -O -L https://git.gnome.org/browse/gtk-osx/plain/gtk-osx-build-setup.sh

and run it from the commandline. It will install jhbuild and do some preliminary setup. Warnings about aclocal, automakers and yelp-tools not being available are normal.

JHBuild is configured to build GnuCash via .jhbuildrc-custom. Download this file to your home directory either by clicking the link and moving the downloaded file or from the commandline:

curl -O -L http://github.com/gnucash/gnucash-on-osx/raw/master/.jhbuildrc-custom

OS X 10.11 added a security feature called System Integrity Protection or SIP. One "feature" is that it strips linker environment variables (the ones starting with LD_ and DYLD_) from the environment when a "system" program does a fork/exec. For our purposes "system program" means one installed in /bin or /usr/bin, in particular /bin/sh.

The Guile compiler, guiled, is a shell script that as written uses /bin/sh to set the prefix then execs guile to run a compilation script. That fails in the presence of SIP.

One can get around this by disabling SIP, but that's a whole-system change that requires a reboot, and SIP clearly has significant security benefits. Don't do that.

The other workaround is to use a shell that isn't in /bin or /usr/bin. One can just copy /bin/bash to one's user directory. Gtk-OSX also provides a bash build in the gtk-osx-bootstrap moduleset which is automatically enabled on MacOS X 10.11 or later.


Then, when GnuCash's build fails, just edit <prefix>/bin/guild to change the first line to

 #!/<prefix>/bin/bash

where <prefix> is the path to your install directory, ~/gnucash-stable/inst unless you've changed it in .jhbuildrc-custom.

You may need to make the following changes to .jhbuildrc-custom:

  • If you are building for an older version of MacOS than the build machine, you can pass arguments to setup_sdk(). There's an example in the comments in .jhbuildrc-custom.
  • The GnuCash v2.6.x (i.e. stable) moduleset uses an old version of WebKit that in turn requires an old version of ICU. Add skip.append("icu").

If you like you can change the directory into which the sources are checked out, build out-of-source, or install to a different directory. See Building Gtk-OSX and the Jhbuild configuration reference for more information.

Run jhbuild bootstrap to install the tools needed for the rest of the build.

setup_sdk

With no arguments (the default) setup_sdk() will configure the build for your system. If you have Xcode 7 (shipped with MacOS X 10.9) or later you can build for any version from 10.6 on with the included SDK by calling (e.g.)

 setup_sdk("10.6", native, ["i386"])

The GnuCash 2.6.x application bundle is built for Mac OS X 10.5 and later. To do likewise, please see [ https://wiki.gnome.org/Projects/GTK+/OSX/Building#Building_for_Older_Versions_of_Mac_OS_X Building for Older Versions of Mac OS X]. You'll use

 setup_sdk("10.5", "10.5", ["i386"])

Note: GnuCash v2.7.4 and later have removed support for autotools; only CMake is supported. Jhbuild doesn't have the ability to modify the build parameters from .jhbuildrc-custom for any build system other than autotools.

Building

Once all of the preliminaries are complete, run:

 $> jhbuild build

Building for Development

Please see Development for general guidelines and lots of helpful links.

If you intend to contribute your work to the GnuCash project please subscribe to the gnucash-devel list and coordinate your work with the core developers before starting.

You'll need to work with the appropriate source code repository rather than the release tarball from the procedure so far. Git provides details on our repository and has some help for developers who aren't yet familiar with the git version control system. If you're going to work on the current release, check out the maint branch. It's simplest to just build it manually in a jhbuild shell. The following assumes that one hasn't changed .jhbuildrc-custom to build out-of-source, and one must make the obvious version edit:

jhbuild shell
cd $PREFIX/../src/gnucash-2.6.17
make uninstall
cd ..
git clone -b maint https://github.com/Gnucash/gnucash.git
cd gnucash.git
./autogen.sh && ./configure --prefix=$PREFIX --enable-ofx --enable-aqbanking --enable-binreloc --enable-dbi --with-dbi-dbd-dir=$PREFIX/lib/dbd && make && make install

To work on the current unstable branch, build meta-gnucash-git as explained in the next section. We recommend that you use separate prefixes for stable and unstable because of the substantially different dependencies.

Building Unstable Versions

By default, the .jhbuildrc-custom file will build the current stable release of Gnucash into ~/gnucash-stable. If you want to build unstable or git master versions of Gnucash, edit .jhbuildrc-custom as follows:

Comment out the line

 prefix = os.path.join(os.environ["HOME"], "gnucash-stable")

and uncomment the line

 #prefix = os.path.join(os.environ["HOME"], "gnucash-unstable")

Similarly, comment out the line

 modules = ["meta-gnucash-stable"]

and uncomment the one that you want to build (meta-gnucash-unstable or meta-gnucash-git). meta-gnucash-unstable will build the latest unstable tarball (only applicable during the few months preceding a major release) and meta-gnucash-git will clone the git repository and checkout the master branch.

Notes

  • Because GnuCash unstable and master use C++ fetaures that don't compile on or for earlier versions, GnuCash master requires Mavericks (MacOS X 10.9) or later.
  • The dependencies for GnuCash 2.6.99 and later have changed rather dramatically from earlier 2.x releases. The most significant are that GnuCash now requires WebKit2Gtk and that in turn requires that GnuCash switch to Gtk3. We've begun the C++ rewrite of engine are using GoogleTest for new unit tests and the Boost Libraries for several language extensions. The register has been fixed to no longer use the obsolete libgnomecanvas and the small part of libgoffice that the CSV importer required has been copied into GnuCash sources.

Boost is in the moduleset, but jhbuild doesn't know how to build it, so that must be done manually. When the build fails, select
[4] Start Shell and do the following:

./bootstrap.sh
./b2 toolset=darwin address-model=32 cxxflags="$CPPFLAGS" cflags="$CPPFLAGS" linkflags="$LDFLAGS" dll-path=$PREFIX/lib --prefix=$PREFIX --builddir=$PREFIX/../build/boost_1_56_0 install
for i in `ls $PREFIX/lib/libboost*.dylib`; do install_name_tool -id $i $i; done 
for i in `ls $PREFIX/lib/libboost*.dylib`; do for j in `ls $PREFIX/lib/libboost*.dylib`; do install_name_tool -change `basename $i` $i $j; done; done

But it's always wise to check gnucash.modules for updated instructions. Look out for a comment before the boost module.

Finally hit ctrl-D to return to jhbuild and select 2 three times to proceed to the next module. Note: jhbuild has taken to crashing in the install step, so ctrl-c quickly to abort that step. If it does crash you can restart with jhbuild build --start-at=googletest.

Building Libdbi Drivers

Even though libdbi supports other databases, each one requires custom initialization code in Gnucash, and Gnucash has that code only for Sqlite3, MySql, and Postgresql.

The distributed bundles don't include libdbi-drivers for MySql or Postgresql. If all you need to do is add a driver, instead of

 jhbuild build

you can

 jhbuild build libdbi-drivers

You'll need the MySql or Postgresql client library and headers installed on your system. Next, add the following to your .jhbuildrc-custom:

 module_autogenargs['libdbi-drivers']='--with-sqlite3 --disable-docs --with-sqlite3-incdir="/usr/include" --with-sqlite3-libdir="/usr/lib"'

substituting mysql or pgsql for sqlite3, and using the correct paths to the include and library files for the DBMS you want to use. Make sure this line precedes any lines adding other arguments for libdbi-drivers, like

 append_autogenargs("libdbi-drivers","--with-dbi-incdir=" + prefix + "/include --with-dbi-libdir=" + prefix + "/lib")

This is theoretically possible without gtk-osx using the already-installed libtool, autoconf, and automake, but there are some problems with glibtool provided by Apple, so it's much easier to just use gtk-osx.

You can copy the driver file (which will be named libdbdmysql.so or libdbdpgsql.so) to Gnucash.app/Contents/Resources/lib/dbd. There's one last task:

 install_name_tool -change /prefix/path/lib/libdbi.0.dylib  @executable_path/../Resources/lib/libdbi.0.dylib Gnucash.app/Contents/Resources/lib/dbd/libdbdmysql.so 

substituting pgsql for mysql if that's appropriate and putting in the actual path (which you can see with otool -L for /prefix/path.

Documentation

The gnucash documentation is online, of course, but if you want a local copy, you can build the modules gnucash-docs or gnucash-docs-git. Just add whichever one you want to your "modules" argument.

Debugging

To get a debugging build, add the line setup_debug() to .jhbuildrc-custom. Beware, though, that WebKit doesn't build with debugging enabled. I usually build everything first without debugging enabled, then enable it and rebuild (jhbuild buildone --force --clean) the packages I want to debug. Most of the time you can get by with just glib and gnucash, but depending on what you're working on, you might also want gtk+, gwenhywfar, aqbanking, or libdbi.

Running from the commandline

Now you're ready to try it out:

$ $PREFIX/bin/gnucash

($PREFIX is the path to where you've built gtk; you can fill it in yourself or use jhbuild shell to set it for you.

Making a Bundle

So far so good, but you don't really want to have to open a Terminal window every time you want to use GnuCash, now do you? Of course not. You want a nice icon in your Applications folder (and maybe in the Dock) to click on when you run GnuCash. Here's how to do this:

Download the bundler, unpack it, cd into the gtk-mac-bundler directory, and make install
Download gnucash.bundle, Info.plist, gnucash.launcher, and gnucash.icns into the same folder. For the rest of the discussion, we'll call that folder gnucash-bundler.
cd gnucash-bundler
Look through gnucash.launcher and gnucash.bundle and adjust the paths to match your installation.
make gnucash.launcher executable (chmod +x gnucash.launcher)
execute jhbuild shell to set up the environment for the bundler
export PATH=$PREFIX/bin:$PATH because jhbuild shell doesn't do this for some reason
gtk-mac-bundler gnucash.bundle
exit

And your bundle should be ready to go. Try GnuCash.app/Contents/MacOSX/GnuCash from the command-line so that you can see any error messages. If that works, try open GnuCash.app. If that works, then you can move GnuCash.app to your Applications folder and it's ready to use. (If it doesn't, error messages are written to the console log. You can run IGE_DEBUG_LAUNCHER=1 open Gnucash.app to see what the launcher script is doing wrong.)

Bundling Unstable and Git

Similarly, the bundle, Info.plist, and launcher scripts change frequently, so you'll need to either clone git://github.com/Gnucash/gnucash-on-osx.git or download gnucash-unstable.bundle, Info-unstable.plist, gnucash-unstable.launcher, and gnucash.icns. They all need to be in the same directory, and you'll run gtk-mac-bundler /path/to/gnucash-unstable.bundle.

Documentation: The bundle includes documentation. If you've built it, great, no problem. You need to have it installed for the Help menu items to work. If you didn't build it and you don't want to, then comment out or remove the lines

  <data dest="${bundle}/Contents/Resources/en.lproj/GnuCash Help/">
    ${prefix}/share/gnome/help/gnucash/C/gnucash-help
  </data>

  <data dest="${bundle}/Contents/Resources/en.lproj/GnuCash Guide/">
    ${prefix}/share/gnome/help/gnucash/C/gnucash-guide/
  </data>

   <data dest="${bundle}/Contents/Resources/de.lproj/GnuCash Help/">
    ${prefix}/share/gnome/help/gnucash/de_DE/gnucash-help
  </data>

  <data dest="${bundle}/Contents/Resources/de.lproj/GnuCash Guide/">
    ${prefix}/share/gnome/help/gnucash/de_DE/gnucash-guide/
  </data>

  <data dest="${bundle}/Contents/Resources/it.lproj/GnuCash Help/">
    ${prefix}/share/gnome/help/gnucash/it_IT/gnucash-help
  </data>

  <data dest="${bundle}/Contents/Resources/it.lproj/GnuCash Guide/">
    ${prefix}/share/gnome/help/gnucash/it_IT/gnucash-guide/
  </data>

  <data dest="${bundle}/Contents/Resources/ja.lproj/GnuCash Guide/">
    ${prefix}/share/gnome/help/gnucash/ja_JP/gnucash-guide/
  </data>
To comment out XML code, surround it like so:
<!-- stuff to be commented out -->
Note that comments cannot contain "--".

Making a distribution

  • On both an Intel and a PowerPC mac, make a clean build including the documentation, making sure that you're not building any libraries with debugging. With all of the dependencies, the package is huge enough without it. Make sure that you're using the latest git masters for gtk-mac-bundler and gnucash-on-osx.
  • Edit the version numbers and, if necessary, the copyright dates in Info.plist (or Info-unstable.plist).
  • Make a bundle as described above. Test it.
  • Download the previous version's .dmg; it has two scripts that you'll need, along with the files License.txt and Sources.txt.
  • Make a directory named for the version that you're going to distribute and move the new bundle into it.
  • Copy the scriptlets "FinanceQuote Update.app" and "Update Dirs.app" along with the files "License.txt" and "Sources.txt" from the previous version .dmg to the new distribution folder.
  • Open /Applications/Utilities/Disk Utility.app and select File>New>Disk Image from Folder in the menu. Select your installation directory in the first chooser and name it appropriately in the second (if you named the folder correctly, you won't have to change anything).
  • Upload both the resulting .dmg to the correct version directory of Gnucash's file manager area on Sourceforge. If this is a stable release, check the "Mac" box on the options panel so that users viewing the project page with a mac will see the new release in the big green button.
  • Upload the .dmg to the release on Github.
  • Update the appropriate links on the Gnucash webpage.

Make Distcheck

If you're going to create the tarballs to upload for a release, you run make distcheck. There are a couple of Mac quirks to work around, so use

 mkdir tmp
 DISTCHECK_CONFIGURE_FLAGS=--disable-error-on-warning TMPDIR="`pwd`/tmp" make distcheck

The first variable lets configure correctly find GLib's gettext bindings (the GLIB_GETTEXT m4 macro issues a compiler warning). The second overrides $TMPDIR, which by default points to a folder in /var/folders and contains characters which choke GConf.

Accessibility

Gtk has its own accessibility library, atk. It doesn't use or support the Mac's accessibility functions; in particular, one must use theOrca screen reader. This isn't provided in the application bundle as as far as we know there is no ready-made Mac build of it.

Helping Out

If you can work on one of these items, please pitch in! Some are Gnucash issues, some are issues with the Quartz implementation of Gtk, and some are integration issues. Join the gtk-osx-devel mailing list to coordinate your work with others.