Difference between revisions of "Tracefile"

From GnuCash
Jump to: navigation, search
(Trace file on Linux: only one)
 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
In the GnuCash application, all error messages during the program run are redirected into a ''trace file''. The content of this file is very important when reporting a bug, as well as a [[Stack Trace]] for bugs that crash the program.
+
;Error Messages: and optionally more details are usually during a ''GnuCash session'' collected in a ''trace file''. The content of this file is very important when [[Bugzilla|reporting a bug]].
 +
:;For Crashs of the Program: also a [[Stack Trace]] is desired.
  
At each program start, a new trace file will be written and all output during the program run will be appended to that file.
+
;At Each Program Start: a new trace file will be created and all configured output during the program run will be appended to that file. See [[Logging]] to fine tune the capabilities and save your settings in a configuration file.
 +
:;Linux and {{Mac}} users: want to save a copy ''before the next GnuCash start'' if the file contains relevant infos.
  
== Trace file on Windows ==
+
;Third party components: have their own log facilities. If you use [[AqBanking]], you might also wish to read about [[AqBanking#Debugging|AqBanking Debugging]].
 +
[[Category:Log]]
  
On [[Windows]] these files are named <tt>gnucash.trace.ABCDEF</tt>, where the .ABCDEF suffix is changed randomly on each start of gnucash. They are usually located in the folder
+
== Name and Location ==
* '''Windows XP''': <tt>C:\Documents and Settings\myname\Local Settings\Temp</tt>
+
=== Linux, *BSD etc. ===
* '''Vista''' and later: <tt>C:\Users\myname\AppData\Local\Temp</tt>
+
On ''Linux'', the most recent  <tt>gnucash.trace</tt> file is located in <tt>/tmp</tt>. ''Some BSD variants'' use <tt>/var/tmp</tt> instead.
for a user named "myname".  
+
* Rename or move it as you like to safeguard it against overwriting.
  
This location may change, if you set the Windows environment variables TMPDIR, TMP, or TEMP (in DOS mode, use the SET command).
+
=== {{Mac}} ===
 +
On {{Mac}}, Gnucash creates the tracefile, gnucash.trace, in the operating system's current temp folder, located in <tt>/var/folders</tt>. The rest of the path has the form <tt>yy/yy_lots_more_hex_characters/-Tmp-/gnucash.trace</tt>. Most systems have several of these, so the easiest thing to do ''on older systems'' is to open <tt>Terminal</tt> and run <syntaxhighlight lang="sh">
 +
find /var/folders -name gnucash.trace
 +
</syntaxhighlight> and it will print out the path for you.
  
Also, the folder name "Local Settings" might be named differently in your native language (e.g. in German "Anwendungsdaten"), and it might also be a "hidden system folder" which is shown only if you change the folder properties to "Not hide system files/folders" in your file manager, e.g. windows explorer.
+
;MacOS 10.13 (High Sierra): has added a convenience environment variable <tt>TMPDIR</tt> so if you have that or later you can easily find the tracefile with <tt>$TMPDIR/gnucash.trace</tt>
  
If you experience crashes or unexpected behavior, check the latest of these files (or the one created when the problem started) and add all interesting-looking lines of that file to your error reports (e.g. in [[Bugzilla]]). Please include at least the lines with the keywords <tt>WARN</tt> (for warning) and <tt>CRIT</tt> (for critical warning).
+
=== Windows ===
 
+
On [[Windows]] these files are named <tt>gnucash.trace.ABCDEF</tt>, where the .ABCDEF suffix is changed randomly on each start of gnucash. They are usually located in the folder
== Trace file on Linux ==
+
:;Since Vista: <tt>C:\Users\myname\AppData\Local\Temp</tt>
 
+
:;Windows XP: <tt>C:\Documents and Settings\myname\Local Settings\Temp</tt>
On Linux, the most recent  <tt>gnucash.trace</tt> file is located in /tmp. Rename or move it as you like to safeguard it against overwriting.
+
:for a user named <q>myname</q>.  
 
+
;Notes:
== Trace file on OSX ==
+
:*The folder name <tt>Local Settings</tt> might be named differently in your native ''language'' like in German <tt>Anwendungsdaten</tt>.
 
+
:*Windows Explorer ''hide''s the <tt>AppData</tt> directory, so after opening <tt>c:\Users\myname</tt> click in the path bar at the top and type "\AppData" and press return. The AppData folder will open and you can continue to navigate normally.
On OSX, Gnucash creates the tracefile, gnucash.trace, in the operating system's current temp folder, located in /var/folders. The rest of the path has the form yy/yy_lots_more_hex_characters/-Tmp-/gnucash.trace. Most systems have several of these, so the easiest thing to do is to open Terminal and run
+
:*It might also be a ''hidden system folder'' which is shown only if you change the folder properties to <tt>Not hide system files/folders</tt> in your file manager like <tt>Windows Explorer</tt>.
$ find /var/folders -name gnucash.trace
+
:*If you set the Windows ''environment variables'' <tt>TMPDIR</tt>, <tt>TMP</tt>, or <tt>TEMP</tt> in DOS mode use the <tt>SET</tt> command – this location may change.
and it will print out the path for you.
 
 
 
== Trace File Adjustments ==
 
 
 
Running
 
gnucash --help
 
in a command shell will give you a clue of possible options:
 
*'''--debug''': Enable debugging mode: increasing logging to provide deep detail.
 
*'''--extra''': Enable extra/development/debugging features.
 
*'''--log''': Log level overrides, of the form "log.ger.path={debug,info,warn,crit,error}"
 
*'''--logto''': File to log into; defaults to "/tmp/gnucash.trace"; can be "stderr" or "stdout".
 
 
 
So, if <code>gnucash --debug</code> is not sufficient, <code>gnucash --debug --extra</code> might be.
 
 
 
Finally with <tt>--log</tt> you can fine tune the [[Logging]] capabilities and save your settings in the special file <tt>~/.gnucash/log.conf</tt>.
 
 
 
== See Also ==
 
  
Third party modules have their own log facilities. If you use [[AqBanking]], you might also wish to read about [[AqBanking#Debugging|AqBanking Debugging]].
+
If you experience unexpected behavior or crashes, check the latest of these files (or the one created when the problem started) and add all interesting-looking lines of that file to your error reports (e.g. in [[Bugzilla]]). Please include at least the lines with the keywords <tt>WARN</tt> (for warning) and <tt>CRIT</tt> (for critical warning).

Latest revision as of 00:42, 20 March 2024

Error Messages
and optionally more details are usually during a GnuCash session collected in a trace file. The content of this file is very important when reporting a bug.
For Crashs of the Program
also a Stack Trace is desired.
At Each Program Start
a new trace file will be created and all configured output during the program run will be appended to that file. See Logging to fine tune the capabilities and save your settings in a configuration file.
Linux and macOS users
want to save a copy before the next GnuCash start if the file contains relevant infos.
Third party components
have their own log facilities. If you use AqBanking, you might also wish to read about AqBanking Debugging.

Name and Location

Linux, *BSD etc.

On Linux, the most recent gnucash.trace file is located in /tmp. Some BSD variants use /var/tmp instead.

  • Rename or move it as you like to safeguard it against overwriting.

macOS

On macOS, Gnucash creates the tracefile, gnucash.trace, in the operating system's current temp folder, located in /var/folders. The rest of the path has the form yy/yy_lots_more_hex_characters/-Tmp-/gnucash.trace. Most systems have several of these, so the easiest thing to do on older systems is to open Terminal and run
find /var/folders -name gnucash.trace
and it will print out the path for you.
MacOS 10.13 (High Sierra)
has added a convenience environment variable TMPDIR so if you have that or later you can easily find the tracefile with $TMPDIR/gnucash.trace

Windows

On Windows these files are named gnucash.trace.ABCDEF, where the .ABCDEF suffix is changed randomly on each start of gnucash. They are usually located in the folder

Since Vista
C:\Users\myname\AppData\Local\Temp
Windows XP
C:\Documents and Settings\myname\Local Settings\Temp
for a user named myname.
Notes
  • The folder name Local Settings might be named differently in your native language like in German Anwendungsdaten.
  • Windows Explorer hides the AppData directory, so after opening c:\Users\myname click in the path bar at the top and type "\AppData" and press return. The AppData folder will open and you can continue to navigate normally.
  • It might also be a hidden system folder which is shown only if you change the folder properties to Not hide system files/folders in your file manager like Windows Explorer.
  • If you set the Windows environment variables TMPDIR, TMP, or TEMP – in DOS mode use the SET command – this location may change.

If you experience unexpected behavior or crashes, check the latest of these files (or the one created when the problem started) and add all interesting-looking lines of that file to your error reports (e.g. in Bugzilla). Please include at least the lines with the keywords WARN (for warning) and CRIT (for critical warning).