Difference between revisions of "Language Administration"

From GnuCash
Jump to: navigation, search
(Components: All)
(Intro: translate-toolkit)
Line 10: Line 10:
 
;About Checks:
 
;About Checks:
 
:* '''gettext''' has a basic set of checks, they should be run ''before each committing''.
 
:* '''gettext''' has a basic set of checks, they should be run ''before each committing''.
:* '''translation-toolkit''', used by [[Weblate]], has a very powerfull set, but it still needs configuration. There are still cases, were our sources are of low quality and should be fixed before. The only check, which [[User:Fell]] didn't find is msgfmt's --check-accelerators.
+
:* '''translate-toolkit''', used by [[Weblate]], has a very powerfull set, but it still needs configuration. It is ''recommended'' to install it locally and learn about it tests.
 +
::*The only check, which [[User:Fell]] didn't find is msgfmt's --check-accelerators.
 +
::*There are still cases, were our sources are of low quality and should be fixed before requiring the corresponding test in weblate.
 
:* There are other checks, which can be useful like '''i18nspector''' for the structure of po[t] files. Run it ''from time to time'' to verify that the headers are still state of the art.
 
:* There are other checks, which can be useful like '''i18nspector''' for the structure of po[t] files. Run it ''from time to time'' to verify that the headers are still state of the art.
As we get translations from several resources, we run basic '''checks''' ''before committing''! Fix them or report them to the LAST TRANSLATOR, if possible.
+
:As we get translations from several resources, we run basic '''checks''' ''before committing''! Fix them or report them to the LAST TRANSLATOR, if possible.
 
:;Wrapping: Some editors — like Geany / PoHelper 1.36 — do not wrap the messages. To have them easier comparable, the wrapping can be done with: <syntaxhighlight lang="sh">
 
:;Wrapping: Some editors — like Geany / PoHelper 1.36 — do not wrap the messages. To have them easier comparable, the wrapping can be done with: <syntaxhighlight lang="sh">
 
msgcat -o po/${LL}.po po/${LL}.po
 
msgcat -o po/${LL}.po po/${LL}.po

Revision as of 00:57, 9 April 2021

This page lists often used commands, sorted by components. In general there are 3 tasks, all done by admins in the repositories of the components:

  1. Updating translations (MsgStr) sent by translators over different channels;
    and, both requiring a fresh pot file,
  2. Add a new language on request of a potential translator
  3. Merging new messages (MsgId) from the source files.

Before this content was spread over several places in Translation.

Intro

About Checks
  • gettext has a basic set of checks, they should be run before each committing.
  • translate-toolkit, used by Weblate, has a very powerfull set, but it still needs configuration. It is recommended to install it locally and learn about it tests.
  • The only check, which User:Fell didn't find is msgfmt's --check-accelerators.
  • There are still cases, were our sources are of low quality and should be fixed before requiring the corresponding test in weblate.
  • There are other checks, which can be useful like i18nspector for the structure of po[t] files. Run it from time to time to verify that the headers are still state of the art.
As we get translations from several resources, we run basic checks before committing! Fix them or report them to the LAST TRANSLATOR, if possible.
Wrapping
Some editors — like Geany / PoHelper 1.36 — do not wrap the messages. To have them easier comparable, the wrapping can be done with:
msgcat -o po/${LL}.po po/${LL}.po
Source String Changes
In theory each time a programmer changes a user visible message, a new pot file should be created and merged into all po files. Sometimes new po files are requested.
After a msgmerge
Before we used weblate it was recommened to send a short mail to gnucash-devel about "Translators: <Component> changed ..." with some clues, what changed like
"complete new download page" or
"fixed 42 typos in the english text".
Notes on command components
LANG=C
serves to get the messages in english to forward them to the translator.
$LOCALE
replace it by the desired locale.
$BUILDDIR
replace it with the right path.

Components

All

In some cases weblate does not recognize the merge of its PRs: That happened actually in Program. So better verify, there are no pending changes.

Glossary

The glossary defines the terminology used in all components.

Check
# 1 file:
msgfmt -c --statistics po/glossary/$LOCALE.po
# OR all files:
for i in po/glossary/*.po; do echo -n "$i:"; LANG=C msgfmt -c --statistics $i ; done
Update
# 1. make pot:
po/glossary/txt-to-pot.sh po/glossary/gnc-glossary.txt > po/glossary/gnc-glossary.pot
# 2. update glossaries:
for i in po/glossary/*.po; do echo -n "$i:"; LANG=C msgmerge --previous -U $i po/glossary/gnc-glossary.pot ; done
New language
cd po/glossary/
# 1. make pot:
./txt-to-pot.sh gnc-glossary.txt > gnc-glossary.pot
# 2. add a new glossary:
msginit --no-translator -l $LOCALE
# DON'T FORGET: add it to CMakeLists.txt
cd ../..

Program

Assumption
Usage of ninja. If you are using make replace ninja by make.
TP specific
  1. download from TP's latest gnucash files,
  2. checks as usual.
  3. on commit set the file's Last-Translator as author.
Check
# 1 file:
LANG=C msgfmt -c --check-accelerators="_" --statistics po/$LOCALE.po
# OR all files:
for i in po/*.po; do echo -n "$i:"; LANG=C msgfmt -c --check-accelerators="_" --statistics $i ; done
Errors caused by --check-accelerators="_"
should be reported to the translator only,
Other errors
should be fixed. At least set the fuzzy flag to inform the translator.
Update
# 1. make pot:
ninja pot
# 2. update po files:
for i in po/*.po; do echo -n "$i:"; LANG=C msgmerge --previous -U $i $BUILDDIR/po/gnucash.pot ; done
New language
# 1. make pot: (tut's das?)
$BUILDDIR/ninja pot
# 2. create a new po file:
cd po/
msginit --no-translator -i $BUILDDIR/po/gnucash.pot -l $LOCALE
# DON'T FORGET: add it to CMakeLists.txt
cd ..

Website

As it is asmall project, it uses a simple Makefile. Also check and statistics are integrated in the mo generation, which again is required to be committed each time a po file changes.

Check
# 1 file:
make $LOCALE
# OR all files:
make mos
Important
Commit the updated mo files to make the changes visible!
Update
after messages in source files changed
# 1. make po/gnucash-htdocs.pot:
make pot
# 2. update po files:
make msgmerge
Create a new po file
# 1. make pot:
make pot
# 2. add a new po file:
cd po/
msginit --no-translator -l $LOCALE
cd ..
# DON'T FORGET: add it to Makefile
Integrate a new translation
into
  1. makefile
    to languages
  2. If a language is new or was bitrotten, add or enable in
    externals/header.phtml
    a line in <span id="language"> and
    lang.php
    a line in
    # key: locale, value: lang_dir
    $supported_languages = array(
            'ca_ES' => 'ca',
            :
            'C' => 'en'
            );
    
    Note
    A few languages are disabled here, because they are bitrotten.

Moving a Language Between Translation Projects

From TP to weblate
  1. Ask the Last Translator, cc the language coordinator
If there is no response after a week
  1. Ask Benno to mark the language as external. The result can be seen in Translation Project: The gnucash textual domain;
  2. in po/CMakeLists.txt move it from TP_LINGUAS to GC_LINGUAS
  3. verify, the po content is recent, else msgmerge a fresh pot.
  4. in weblate:GnuCash/Program/Einstellungen remove it from the filter.

When to msgmerge

Some translators complain, it is so hard to update .po files. When should we do it?

From https://translationproject.org/html/robot.html
The Translation Project robot is not allowed to update the registry with new information about maintainers, languages, or translators, nor is it allowed to process POT files. These things are still handled by hand. When a new POT file is being registered by a project coordinator, the registering script calls msgmerge when previous translations exist, so translators are notified of a PO file which is up-to-date. New POT files are announced automatically to a team's mailing list, if the team has asked for this feature.

So for $TP_LINGUAS it is done on each release - at least for the updated files.

OTOH Weblate has a different philosophy: it should be done just in time.
As TP ignores our po[t] files, it can be done often.

Merging with divergent source trees like 2.6 to 2.7

The source tree in GnuCash 2.7 was thoroughly restructured, so it is now very different from 2.6. One side effect of this is that the MsgIds in our 2.7 *.po files are in a completely different order compared to 2.6. This means git merge of maint in unstable will break the 2.7 *.po files. So when merging from 2.6 to 2.7 we have to ignore all changes in the maint po files at this point. To rescue at least parts of the work, try this.

# Set your language in LL, e.g.: export LL=de
# while you are in the maint branch save your .po file outside of the repo e.g. as maint."$LL".po
git checkout unstable
git merge maint                                       # resolve the full LL.po merge by using the unstable version of LL.po (other files can be merged as normal)
cd ../build                                           # assuming ../build is your build directory
make pot                                              # update the template with changes from maint
cd ../src/po                                          # assuming src is your gnucash git repo
msgmerge "$LL".po ../build/po/gnucash.pot -o "$LL".po # update the po of your $LL
msgcat --use-first "$LL".po ../<path_to>/maint."$LL".po -o "$LL".new.po

For the best result you might test different msgcat parameters. Finally

mv "$LL".new.po "$LL".po