שפות	English	עִברִית

עצה ניתן להשתמש בתרגום גוגל, לבחר שפה, ולקבל תרגום של מסמך זה

כללי

מטרת עמוד מידע זה לספק הוראות ביצוע, שלב אחר שלב, על אופן יצירת או עדכן תרגום ומשימות מקמום (localization) אחרות במגרת מיזם גנוקאש. בנוסף קיימים עמודים יעודיים גם עבור:

תוכניות: I18N ו־

תחזוקה: Language_Administration.

מבוא

קיימים בגנוקאש כמה אזורים שמצריכים תרגום או מקמום בעדיפות גבוהה:

מילון מונחים

A reference in form of a message catalog with roughly 200 terms that are commonly used throughout GnuCash and their explanation. Preferably it should be translated first for each new language to define a consistent terminology for the other parts.

התוכנה

Its message catalogs contain all text messages for the application's user interface. It currently consists of roughly 5000 strings. Not all are equally important though.

Please read at least #Adjust special messages and #Special characters and other tips, if you use one of that services.

The Windows Installer

It contains some 20 strings.

The Account Templates

A set of ready to use account chart snippets for personal users that can be mixed and matched into a full chart of accounts during the creation of a new a new GnuCash file with currently 115 translatable account names.

• If your government or other authorities offer specific templates for business users, you can create them, too.

The Documentation

The Help Manual and the Tutorial and Concepts Guide. These documents explain how to use GnuCash. They are written in DocBook, an XML variant.

אתר המרשתת

While mostly written in PHP/HTML, it uses message catalogs, too. Currently it has 430 messages.

• In theory one could also translate recent announcements from the news directory into the language specific subfolder, but ususally there are more important tasks around.

טבלאות מס

They require some knowledge of your regional tax rules and are related to account templates.

מטבעות

GnuCash uses the translation of the ISO 4217 currency codes and names. This are maintained by the ISO Codes Team. If your language is missing or has issues contact them or contribute:

• Optionally you can #Check Files in Repo gnucash's doc Directory files, too.

מקורות זמינים

באתר gnucash.orgובאתרים אחרים. נא לא להסס להשתמש במקורות הךךו. קיימים מקורות רבים

gnucash.org

צוות מיזם גנוקאש אסף וריכז מידע רב באתר ויקי זה -

ניתן לנווט מהעמוד הראשי, או ממקטע הקטגוריות שבתחתית העמוד ,או להשתמש ביכולות ה חיפוש –

ומאתר המרשתת https://www.gnucash.org/. בנוסף המיזם העמיד מספר ערוצי תקשורת וכלים שימושיים אחרים:

IRC

The fastest way to get help on simple questions is using the internet relay chat IRC, as many of the developers hang out there and are eager to help.

Mailing lists

Translators will probably find two or three gnucash mailing lists of interest. If you can not find the answers to your questions in their Mailing_Lists#Mailing List Archives, feel free to ask them.

• For language and region specific questions, where you should discuss terms and ask for proofreading of your work, use your languages mailing list. Currently we have

  gnucash-[pt_]br, de, es, fr, it, nl.

If none exists for your language or nobody has an answer there, use the english lists:

• General use questions and answers are found on the gnucash-users mailing list,
• specific development questions go to the gnucash-devel list.

• If you dislike the heavy traffic on the above lists, you should at least subscribe the gnucash-announce list to get informed about new :releases.

To subscribe or view archives of these lists follow the links to the Mailing Lists.

weblate.org

Since 2020-12-14 the translations of some components, currently Glossary, Program and Website, are available at GnuCash @ Hosted Weblate. Note that languages of the program managed by #translationproject.org are not listed at weblate.

• Only a web browser, no additional software required to contribute.
• Already as anonymous you can add suggestions and comments.
• After you created there an account, you can edit the translations.
  • If you also have a GitHub account, we can give you some feedback on your contributions.
• If you already have been a GnuCash translator, tell us

  on irc://irc.gimp.net/gnucash (help about IRC) or

  by a mail to the gnucash-devel list your Weblate name to become a weblate/GnuCash reviewer there.

• We appreciate any help on the optimal configuration by experienced weblate users. You can contact the GnuCash team by irc://irc.gimp.net/gnucash or Mailing Lists.

כלי תרגום מבוססי מרשתת אחרים

Several services for translation coordination exist, see Improve Localization Process#Web Based Translation Tools. As we have no experience with them contact the gnucash-devel mailing list before using them.

translationproject.org

The Translation Project coordinates the message cataloges of several programs

Up to Gnucash 4.9 (2021-12)

some of our translators had used it: last files. Most of them are now using Weblate.

תרומה ישירה קלסית

במידה ותרצו לתרגם תרגום חדש, כזה שעדין לא נמצא ברשימת השות, ולשגר את הקובץ המתורגם ישירות למיזם גנוקאש, נא לקרוא הלאה.

הדרך הקלה ביותר להתחיל היא להוריד את הקבצים מ־[1] אלה יכללו גם את קובצי ה־po/gnucash.pot. Git כמקור, תאלצו לבנות build את גנוקאש מהמקור על מנת לחולל את קובץgnucash.pot.  אם במקום זאת תבחרו ב־

On Other Sites

Technical Reference

For many components we use the Gettext package. If you need help with msg* commands or the .po file format, read it's manual.

General Translations Guidelines and Tips

General information about how to approach the translation of software can be found here:

Weblate

• https://docs.weblate.org/en/latest/

Gnome

As GnuCash is GTK based we follow their rules for consistency.

• In GNOME Human Interface Guidelines the most important section is writing-style, but also keyboard-input is of interest for the program.
• GNOME Documentation Style Guide V1.6
• https://wiki.gnome.org/TranslationProject
• https://wiki.gnome.org/TranslationProject/LocalisationGuide

KDE

• The KDE Translation HOWTO

Other Useful Sites

• Often, but not always, https://en.wikipedia.org/wiki/ has a good explanation and proper language links for special terms.

Comparing articles on wikipedia in your language and english can be helpful.

• There are many online dictionaries, use a search engine like google, to find the best fitting.
• An index of on-line dictionaries and a lot of other resources can be found at www.yourdictionary.com.
• In special cases the terminology database of the European Union Inter Active Terminology for Europe can be used, too.

How to submit changes directly to GnuCash

Once you've improved a translation, there are several options:

Pull Requests at GitHub

Pull requests are the fastet way to get your work applied.

If you already are a github user you can publish your work as a separate branch on your gnucash[-{[ht]docs|on-windows}] fork and send a pull request to the GnuCash team. If you wish to continue your work before the request was completed, simlply create a new working branch. After the pull request was completed you can delete the related branch again. See Git for details.

Commit messages

1. Start your commit message with L10N:<LL>:

   were <LL>—or ${LL} below—is your language code.

2. Append the output of msgfmt -c --statistics ${LL}.po

Example

L10N:de: 5423 übersetzte Meldungen.

Weblate

One hour after you stopped editing it will create a pull request on your behalf.

Tip

If you have a GitHub account you will get informed and can follow the process.

Verify the Result

After it got merged, you can …

Website

immediately open https://www.gnucash.org/

Program

the next day download the (Linux) Flatpak or Windows nightly

to see and test the reslut of your work.

Obsolete Ways

Use they only if you have good reasons not to use one of the ways mentioned before!

Patches at Bugzilla

Before it was recommend to use Bugzilla. :

• Create an account if you still have none or login,
• create an request for enhancement bug against the Gnucash component translations, choose the version on which your patch is based and
• attach a patch

containing the diff between the old files - if any - and your new files:

• If you have Git installed, the easiest way to create the patch is git format-patch origin/maint..maint.
• Else you can use diffutils: diff -u[r] <original path> <modified path> > <name>.patch. See info diff for details.

Mailing lists

You can simply email your completed message catalog (.po file) to the developers at the gnucash-devel mailing list. We'd really rather you use Github or Bugzilla because those are much less likely to get lost or forgotten, but if you really find those too hard we'll try to accommodate you on the list.

Translating the Program

To begin a translation you need either the message template file (gnucash.pot) if you're starting a new translation or the existing message catalog (xx.po or xx_YY.po, where xx is the ISO code for your language and YY the ISO code for a language-variant locale, see Naming Convention). These files are in the gnucash sources, which you can obtain either from our git repository or by downloading the latest release tarball from Sourceforge.

Get the source from Git

GnuCash uses Git as version control system. If it is new for you read An Introduction to Git.

The first thing to do is usually, to download the latest STABLE branch, called maint, of gnucash from git and get it to build.

Normally checkout the current stable branch:

The argument ${SOURCEDIR} above can be whatever you want your local directory to be called, and is optional in the first line. If you leave it out, you'll have a directory called gnucash created containing all the source code below your current working dir.

Checkout the documentation (optional, but recommended):

Update your repository

After this initial git checkout, you can later update your local repository using

from anywhere in the tree of ${SOURCEDIR}. We recommend to do it daily when you start your work.

Get packages, which are used while building

• Dependencies contains the list of packages, which are used while building GnuCash. If some are missing the configuration by cmake or the build by make or ninja will fail.
• For working on .po files we use several commands starting with msg. This are part of gettext-tools.

Caution

Gettext versions < 0.20 are known not to extract the 'developer_name' xml node, which contains the msgid "GnuCash Project". Do not remove this msgid!

• Optional

  Translate Toolkit is already used by Weblate and other projects. While gettext offers only a few formal checks Translate Toolkit has many quality checks in its pofilter command.

Under Linux use your package manager and install them.

Steps in the Build System

GnuCash uses the cmake build generator to control the build of all components. Details are described in Building. The following short-form instructions work on Unix systems and assume that you have already set up the dependencies according to the FAQ. If you are building the unstable or master branches you'll need to use your package manager to install two more development packages, boost-all-devel and googletest.

Build system generation

It's generally preferred to use a separate build directory. So let's set one up next to our source directory: Next generate a build system in the build directory. Still in the build system, exectue

This will set up a proper build system in the build directory based on the CMakeLists.txt file in the source directory. If generation fails or if you want to refine your build consult Building.

If all goes well you'll end up with a directory structure as follows:

Compile

It is recommended that you compile the gnucash source code. It is a good idea to actually run gnucash with your new translations because it is quite helpful to see the phrases in the context of the running program.

Compilation is done by executing the make command in the build directory.

Note

Experienced users may prefer to use Ninja instead of Make. How to so is beyond the scope of this page.

Run

GnuCash can be run from the build directory as follows:

Note the use of './bin/' in the line to execute gnucash. This is to make sure you run the gnucash executable you just built rather than one that's installed by your distribution. Omitting this explicit path specification in the command will cause your system to launch

your distribution's pre-installed version of gnucash:

In either case, you can easily switch between the various languages the gnucash has available by placing the LANG env var before the call to the executable. You can find details in Locale Settings.

Documentation

The GnuCash Help Manual and the Tutorial and Concepts Guide can use the same CMake build system as the code.

1. git clone gnucash-docs or unpack a gnucash-docs tarball
2. Using a terminal, go to your gnucash-docs directory

   cd /path/to/gnucash-docs # replace the example path with your real path
   

3. Make a build directory next to your source directory and go into it

   mkdir ../gnucash-docs-build
   cd ../gnucash-docs-build
   

4. Configure the build system

   cmake -D CMAKE_INSTALL_PREFIX=../gnucash-docs-install ../gnucash-docs
   

   These commands will set up a directory structure as follows:

   path/to/
     gnucash-docs/          # directory with gnucash-docs sources
     gnucash-docs-build/    # directory to generate gnucash-docs in various formats
     gnucash-docs-install/  # directory to install final result (not needed for development, just for completeness)
   

5. still in your build directory run

   make html
   

The new documentation home pages will be and ,

where ${LOCALE} is one of C, de, it, ja, or pt (English, German, Italian, Japanese, or Portuguese respectively). You can use the file: URL scheme to point your browser to one of them; the links will work from there.

Naming Convention

The language code is of the following form:

<language>[_<REGION>][.<Charset>][@modifier]

using the well known ISO codes 639-1 for languages and 3166-1 for regions, which are in most cases countries .

• Only if no 2 letter code exists for your language in ISO_639-1, use the 3 letter code from ISO_639-2.

• If you are the first translator for your language, you should
  • name your files and directories only with your language code.
  • set Language: in the header of your po file with the full (language and region) code, if significant.

So all people using your language despite of their region will benefit from your work.

• If there are parts, which are specific for your region, e.g. business account templates respecting local law, then they should be in a <language>_<REGION> directory.
• The common charset in gnucash is utf8.
• In the rare case different scripts are used for the same language like kyrilic and latin add for the less used the modifier e.g. sr@latin.

In the following parts of this document 'XXXX' and 'LL'—often prefixed by $ to mark them as variable—refer to your language code.

Contact the maintainer of your language

To find out who is the last person to work on your language, look near the top of the po/XXXX.po file which corresponds to your language. If your language does not have a .po file available, see the next section.

The beginning of your .po file should look something similar to this:

Look to see who the "Last-translator" was, and send an email to that person and ask what you can do to help. This is important because if there already is an active maintainer of the translation file, you should interact directly with him or her. If there is no Last-Translator, or that person is not maintaining the file actively (and tells you to take over or does not answer in reasonable time), you will become the maintainer and you should change the "Last-Translator" to your name and email address.

The glossary file

Inside the po/glossary/ directory should be a "glossary" file for your language. This file contains a bunch of commonly used terms found in GnuCash - and the explanation of a few very specific for GnuCash like the disambiguation between bill, invoice and voucher. It is recommended that you get this file translated first, and use it as a guide when translating the real .po file or the documentation. Please keep in mind that this file will never be visible to a user! The glossary file is only a tool for you, the translators! I repeat: The strings from the glossary file will never be user-visible, they are only used by you, the translator.

Todo

The current files have a very informal form. To make them more useful like conversion in tool specific glossary formats, we should replace

msgid "generic term: term"

by

msgctxt "generic term"
msgid "term"

1. Go into the glossary directory:

   cd po/glossary/
   

2. If your .po glossary file does not exist or is older than gnc-glossary.txt, create the template:

   ./txt-to-pot.sh gnc-glossary.txt > gnc-glossary.pot
   

3. Create or update your language's glossary file:
   • If your .po glossary file does not exist,
   1. use this gnc-glossary.pot file to create it with

      msginit # add -l<locale> if different from your settings
      

   2. Add your file into the set_dist_list(po_glossary_DIST ...) command in glossary/CMakeLists.txt

      set_dist_list(po_glossary_DIST CMakeLists.txt bg.po ca.po da.po de.po el.po es_NI-policy.txt es.po fr.po gnc-glossary.txt he.po
              hr.po hu.po it.po nb.po nl.po pl.po pt_BR.po pt.po ru.po rw.po sk.po sv.po txt-to-pot.sh vi.po zh_CN.po zh_TW.po)
      

      to get it in the tarball.
   3. After changing CMakeLists.txt you have to rerun

      cmake # add your options
      

   • If your .po glossary file exists, but is older than gnc-glossary.txt use the msgmerge program to update it:

     msgmerge --previous -U $LL.po gnc-glossary.pot;
     

4. Now open your language's glossary file and translate it completely.
5. Don't forget to #Check syntax and statistics of your .po file.

Terms missing or inadequate in the glossary file

If you detect an important term which is missing or could be better explained,

• create a pull request at github

for the source file gnc-glossary.txt.

With the exception of the header the lines of this file are alphabetical sorted and have the form:

Reminder

Does your editor enter <TAB>s or will it replace them with <Space>s?

To test it, run the following steps after you changed gnc-glossary.txt:

1. To generate a new gnc-glossary.pot:

   ./txt-to-pot.sh gnc-glossary.txt > gnc-glossary.pot
   

2. run above msgmerge command for your LL.po,
3. check and translate the new string in this updated glossary file.
4. If successful, update all *.po files with:

   for i in *.po; do echo -n "$i:"; LANG=C msgmerge --previous -U $i gnc-glossary.pot ; done
   #old form: find *.po -exec /usr/bin/msgmerge --previous -U '{}' gnc-glossary.pot \;
   

Note

The last step can also be done by a maintainer.

LANG=C is only recommend for maintainers to get english error messages.

Get a fresh template

The Portable Object Template (.pot file) is a collection of all translatable strings.

It is important, to repeat this step e.g. after you asked a developer to change an insufficient string or you got an announcement about changed strings like commit messages starting with "I18N: " or containing a "[I18N]" flag.

Tip

If you have problems with this section, you download instead the "current template" from the translationproject.org. But keep in mind it is based on the last release and does not contain recent changes.

1. If your repository is no fresh checkout, you should first #Update your repository:

   git pull --rebase
   

2. Only on the first run see Building to set up your build environment depending on your OS.

   Note

   As you can use make or ninja, on this page we write always make <target>. If you decided to use ninja, execute ninja <target> instead.

3. Then in gnucash, a specific command at the top-level of the build tree (or source tree, if you do not use a separate build directory) will perform all necessary steps for this:

   cd ${BUILDDIR} # adjust ${BUILDDIR}
   make pot
   

4. If make complains make: *** No rule to make target `<path/to/missing-source-file>', needed by `gnucash.pot'. Stop. there are obsolete relicts from a previous build. Just run

   make clean  # remove obsolete files
   make pot    # try it again
   

5. Now go into the po directory:

   cd ${SOURCEDIR}/po # adjust ${SOURCEDIR}
   

If your language file already exists, continue with #Update an existing .po file.

Build a new .po file

If there is no .po file for your language, then you can start a new one. Start by

where LL is your language and RR your region code, if there is already a different LL.po like e.g. pt and pt_BR.

-i<path/to/>gnucash.pot is required, if you use a separate build dir,

-l... is only required, if your target is different from your environments current language.

This will initialize the meta information with values from your user environment.

Note

msginit 0.19.3 is querying an obsolete address of the translation project for language teams, but that doesn't matter.

If that does not work you can copy the file gnucash.pot into a work file named LL.po and just edit this file.

Adjust the header

The top of the .po file should be edited somewhat. Most of this adjustments should already be done by msginit, but if you copied the template, you will have to adjust all.

• The comments at the top of the file should be changed to be current:

  # Messages in Deutsch fuer GnuCash
  # Copyright (C) 1999 Free Software Foundation, Inc.
  # Jan-Uwe Finck <Jan-Uwe.Finck@bigfoot.de>, 1999.
  

Expand the copyright comment by a list of <Translator name> <email address>, year[ range] in reverse historical order. Then you can later copy the list into translator-credits.

• This is also a good place to record typographic conventions, if more than one person work on the file:

  #
  # Konventionen/Tastenkürzel:
  # »Zitate«: [altgr]+[Y]/[X]
  # Gedankenstrich — [altgr]+[Shift]+[-]
  

• The first, empty msgid "" contains information for you and the gettext tools. Each line of the msgstr contains a capitalized entry, a colon and a value. Replace all uppercase words with something appropriate. In this case, you will be the first author of the translation, and also the

• Last-Translator: your name and email address. This person is responsible for the file, so we need an email address to contact you.

Do not change it, if you do not want to become the responsible person. Despite that you can add yourself to the above copyright section and translator-credits below.

• Language-Team: Some languages are maintained by teams and everybody wants to get informed. That is the case for organizations like #translationproject.org or the german Gnucash translator team. Enter the teams name and email address. If you are no member of a team, keep it empty or write NONE. Team members can reuse this line in translator-credits
• Language: should be the same as the filename without extension, usually the ISO code of your language.
• Project-Id-Version: <Package name> and <Version>. Do not forget to update the version. msgmerge seems not to be able to do it for you.
• Report-Msgid-Bugs-To: Should already been set by .msginit to https://bugs.gnucash.org/buglist.cgi?roduct=GnuCash&component=Translations or similar, where you can report issues with the msgids like
  • "There is a typo in <msgid>" or
  • "<msgid> is impossible to translate to <your language> because of the grammatical difference …"
• POT-Creation-Date: gets updated by msgmerge.
• PO-Revision-Date: The timestamp of the last modification. Editors with a specific po mode should update it on saving. If you use a normal text editor, you will have to do it manually.
• Do not change the content section

  "MIME-Version: 1.0\n"
  "Content-Type: text/plain; charset=UTF-8\n"
  "Content-Transfer-Encoding: 8bit\n"
  

  but replace its older forms like:

  "CHARSET: UTF-8\n"
  "ENCODING: 8bit\n"
  

  with the recent form.
• Make sure that the header of your .po file contains an adjusted form, e.g. for slavian languages set nplurals=3, of this line:

  "Plural-Forms: nplurals=2; plural=n != 1;\n"
  

See Gettext Manual: Translating Plural Forms for details.

See the full explanation in [{{URL:gettext-manual|html_node/Header-Entry.html} Gettext Manual: Header Entry].

• Remove the `#, fuzzy' line once you have specified the items in capitals, because once this is done the header entry is no longer fuzzy.

Adjust special messages

• There is currently one special string:

  #: gnucash/gnome-utils/gnc-main-window.c:4737
  msgid "translator-credits"
  msgstr ""
  "Christian Stimming, 2001-2021\n"
  :
  "Jan-Uwe Finck, 1999\n"
  "\n"
  "Anregungen, Kritik und Fragen zur Übersetzung an die\n"
  "deutschsprachige GnuCash-Gemeinschaft <gnucash-de@gnucash.org>\n"
  "Um die Moderation zu vermeiden, empfiehlt sich die Anmeldung auf der\n"
  "<a\
   href=\"https://lists.gnucash.org/mailman/listinfo/gnucash-de\">Liste "
  "gnucash-de</a>"
  

This will appear in Help->About->Credits->Translation. So you should enter your name or that of your team and an email address where users can contact you for typos and gifts.

Tip

After some time more persons would have worked on the translation. Then you can expand it from your header comments to:

msgstr ""
"<current translator>, <years>\n"
"<previous translator>, <years>\n"
:
"<first translator>, <years>\n"
"\n"
"Send suggestions, critizism and questions about this translation to\n"
"Klingon speaking GnuCash community <gnucash-tlh@gnucash.org>\n."
"To avoid moderation we recommend to subscribe at\n"
"<a
# This comment exists only to trick the spamfilter. Rejoin the surrounding lines again.
 href=\"https://lists.gnucash.org/mailman/listinfo/gnucash-tlh\">List gnucash-tlh</a>"
# Don't forget to replace Klingon (tlh) by your language and translate the rest!

If a list exists, we suggest to remove the email address of individuals for data protection reasons.

Prepopulate your file with translations from your glossary and other projects

The basic idea is decribed in Gettext Manual: Using Translation Compendia. Your translator tools might already support compendia. If not, i.e you are using a plain text editor, here is the manual way:

There are in total 3 programms in use:

msgcat

Concatenates and merges the specified PO files.

msgmerge

Merges two or more Uniforum style .po files together.

msgattrib

Filters the messages of a translation catalog according to their attributes or manipulates their attributes.

Example

To merge a compendiumn like our glossary:

cd ${SRCDIR}/po
# Gettext manual's suggestion to merge compendia without old po file:
msgmerge --compendium glossary/${LL}.po -o ${LL}.po /dev/null ${BUILDDIR}/po/gnucash.pot
# Perhaps better:
msgmerge -U ${LL}.po --compendium glossary/${LL}.po ${BUILDDIR}/po/gnucash.pot

GOffice

Gnucash has borrowed a couple of source files from goffice. Those files contain a number of translatable strings. The goffice translation teams have already put effort in translating those in many languages. To reduce our translation effort, the script linked in I18N#Borrowing Code can be used to import these translations into our own po files.

If the goffice part for your language is incomplete, you might consider to offer them to update their file with your work.

GTK3

Stock buttons became deprecated in their version 3.10. They included:

1. a label with mnemonic,
2. for which the translation was already done in the gtk domain,
3. a unique icon was associated.

So they are no longer used since gnucash 3.0. We use still the same labels, but the GTK translation is not directly used.

You can save some work by merging the po file of your language from GTK3, i.e. from https://gitlab.gnome.org/GNOME/gtk/tree/gtk-3-24/po into your gnucash po file.

Example

To merge fitting translations from GOffice and GTK:

#Example to merge common parts from po files in GOffice and GTK

# Variant A: in single steps to watch their results
## 1. join 3. party translations
msgcat --use-first -o tmp.po ${LL}.po ${GOFFICEPATH}/po/${LL}.po ${GTKPATH}/po/${LL}.po
## 2. Remove unused messages. Authoritativ is gnucash.pot:
msgmerge tmp.po ${BUILDDIR}/po/gnucash.pot | msgattrib --no-obsolete > {$LL}.po
rm tmp.po

# Variant B: in one command:
msgcat --use-first ${LL}.po ${GOFFICEPATH}/po/${LL}.po ${GTKPATH}/po/${LL}.po | \
msgmerge ${BUILDDIR}/po/gnucash.pot | \
msgattrib --no-obsolete > {$LL}.po

Adjust po/CMakeLists.txt

Also include your language code into the NEW_LINGUAS variable in the CMakeLists.txt file in the po folder of your source directory:

CMakeLists.txt is a file, which controls the configuration of the build process. So after changing it, you have to rerun cmake. Some IDEs like Eclipse will do it automagical for you.

As part of the build your LL.gmo file is generated in the po directory of your build tree. Finally make install will copy it to the place, where it will be found at runtime. If you forget one of the steps, your translated language will not appear.

Continue with #Translating the .po file.

Update an existing .po file

Before you begin actual translation work, you should update the gnucash.pot file and use this to update your .po file. This process will insure that you have the latest translatable strings.

If your language file already exists, update it using the msgmerge program. This will move the old translations of unchanged strings in the new file:

Note

If you had choosen a separate build directory, e.g. .build, adjust the path in above command:

cd ${SRCDIR}/po # adjust ${SRCDDIR}
export BUILDDIR=../build # adjust this
msgmerge --previous -U LL.po ${BUILDDIR}/po/gnucash.pot

Separate commits for "noise" and real work

You should now run git commit or create a patch "L10N:<locale>: Merge recent template".

This will contain only the "noise" from the updated pot file as usually many line numbers change.

Diff example after msgmerge

 #. Business options
-#: ../src/app-utils/app-utils.scm:303
-#: ../src/business/business-gnome/gncmod-business-gnome.c:117
+#: ../src/app-utils/app-utils.scm:322
+#: ../src/business/business-gnome/gncmod-business-gnome.c:119
 msgid "Business"
 msgstr "Geschäft"

Hiding your real changes in hundreds of such sections will make it really hard for your coworkers to find them.

After having done your translation you submit a second commit or patch containing your actual work "Update <locale>.po".

You should also do it, if your current translation tool uses other format settings like line breaks as the previous tool. In this case just open the file, save it and git commit or create a patch "L10N:<locale>: Preparation: Reformating".

Example in KBabel format

#: ../src/app-utils/business-prefs.scm:33
msgid "The format string to use for generating customer numbers. This is a printf-style format string."
msgstr "Используемая строка форматирования для создания номеров клиентов. Её формат соответствует printf."

Example in PoEDit format

#: ../src/app-utils/business-prefs.scm:33
msgid ""
"The format string to use for generating customer numbers. This is a printf-"
"style format string."
msgstr ""
"Используемая строка форматирования для создания номеров клиентов. Её формат "
"соответствует printf."

Review the file header

• Project-Id-Version should be GnuCash 5.10 and

<tt>POT-Creation-Date should be recent. If they are not, you probably forgot #Get a fresh template or #Updating an existing .po file.

• The PO-Revision-Date should be >= POT-Creation-Date.

Some, but not all tools will do this reliably for you.

Translating the .po file

Finally. You are ready to do some translating!

The .po source files are plain text files.

Tools

Some plain text editors offer a specific syntax highlighting for .po files, but there are also specific tools you can use:

• Emacs has a po-mode to edit po files.
• Geany, an editor with sytax highlighting and a little bit more
• GTranslator is another tool but we recommend not to use it because the version of 2006 doesn't support all of the interesting elements inside the po file. Update this, if you know it is fixed.
• Lokalize is the successor of KBabel since KDE4.
• Poedit to finish the PO file edit and build.

Version 2.1.1 had issues

• POEditor can be used online.
• translate-toolkit is a python based suite. It is also used by sevices like weblate.
• Wikipedia:
  • List of translation software
  • Comparison of computer-assisted translation tools

(feel free to add more tools here)

Gettext source (.po) file format

Record Format

A record in a po file has the following form:

• The empty or only white-space line is the record separator.
• In translator-comments you can put your own notes.
• The extracted-comments are notes from the programmers for you.
• One or more references tell you, where the message appears in the sources.
• The most important flags will be explained below in # Common Flags and source language format flag will be explained below.
• The previous-* entries will only appear, after msgmerge --previous … for fuzzy messages to show what changed.
• An optional-message-context has the purpose to distinguish equal msgids with different meanings.
• The msg* should explain themself above.

Example

Here is an example of translating some text into German:

Before

#: messages-i18n.c:11
msgid ""
"The GnuCash personal finance manager.\n"
"The GNU way to manage your money!"
msgstr ""

After, the translation in the de.po file

#: messages-i18n.c:11
msgid ""
"The GnuCash personal finance manager.\n"
"The GNU way to manage your money!"
msgstr ""
"GnuCash: Ihr persoenlicher Finanzmanager.\n"
"Der GNU-Weg, ihr Geld zu verwalten!"

You should read through every translation in the .po file at least once.

Common Flags

Fuzzy Flag

If you see a string that has the phrase #, fuzzy in the flags comment above it, review the translation and confirm it by removing

• the , fuzzy flag, but no other flags like , c-format,
• the #| msgid lines, and in some cases
• the #| msgctxt line.

A fuzzy translation means that the translation will be ignored by the program.

There are at least 2 reasons for the fuzzy flag:

1. one of the msg* programs took some guess about what the translation might be from similar msgids,
2. in a previous version you had a valid translation, but a programmer changed (parts of) the msgid.

After you finish translating, you should not have any "#, fuzzy" strings left. Remember, a string marked as "fuzzy" means it will not be translated in the program. You can filter for fuzzy messages by running

Example fuzzy message

#: messages-i18n.c:35
#, fuzzy, c-format
#| msgid "There was an error opening the file %s."
msgid "There was an error writing the file %s."
msgstr "Es gab einen Fehler beim Oeffnen der Datei %s."

Here the msgid was changed from "opening" to "writing". You need to correct the translated string, remove the line(s) with the old msgid "#| msgid …" and the 'fuzzy' flag, because only then the translation will actually appear in the program.

Example fuzzy fixed

#: messages-i18n.c:35
#, c-format
msgid "There was an error writing the file %s."
msgstr "Es gab einen Fehler beim Schreiben der Datei %s."

Notice that #, c-format was not removed. That is correct, you should leave that.

Tip

If all fuzzy strings were fixed (msgattrib --fuzzy $LL.po returns nothing), you can also bulk remove the previous messages with

msgattrib --clear-previous -o $LL.po $LL.po

Format Flags

Because parts of GnuCash were written in different programming languages, there appear at least 2 different format flags:

c-format

Format specifier: %

When you see the comment "c-format", it means that the format codes in the translatable string are referring to C formatting codes. So, '%s' means text, '%d' means an integer, etc...

scheme-format

Format specifier: ~

Todo

Which parts of #Special_characters_and_other_tips would better stay here?

Orphaned Records

At the end of your file you might see records like

They have no reference line. This records are no longer in use and you can remove them.

Translate the strings

Each message to translate is then given in turn in the PO file. For example, an untranslated entry might be: The empty msgstr string has to be filled with the translation for the string shown after msgid. If you were a German speaker, say, the entry once translated might look like:

You just produce a translation for all entries in the PO file, one after another, respecting the overall file format and the quoting needed for special characters, when needed. Observation and intuition may allow you to grasp what the format should be; the precise rules for PO files are given in the GNU gettext manual. The msgfmt program is helpful for pinpointing formatting errors.

Contexts

Important

With Gnucash 3.7 the first 2 forms got replaced by #Message Context. The description of the old types is only kept for some time to help updating older catalogs.

At some places, GnuCash uses "disambiguation prefixes" in translatable strings. Here is an old explanation: https://lists.gnucash.org/pipermail/gnucash-devel/2005-October/014236.html ; more explanation is also here: https://wiki.gnome.org/GnomeI18nDeveloperTips.

There are at least 2 use cases:

• Abbreviations, i.e. for columns and their headers:

  msgid "Reconciled"
  msgstr "Abgeglichen"
  :
  msgid "Reconciled:R"
  msgstr "Reconciled:A"
  

• Sample text to determinate the size of the output cell. Instead of a translation the "worst case" of expected text in your language is required here.

For the following example the german tranlators copied the longest path of account names from their business account templates as shown in the accounts tab of Gnucash:

msgid "sample:Expenses:Automobile:Gasoline"
msgstr "sample:Aufwendungen 2/4:Reparatur/Instandhaltung:4805 Reparatur u. Instandh. von Anlagen/Maschinen u. Betriebs- u. Geschäftsausst."

Important

Keep the part before the colon untranslated.

Another form - without need to insert the prefix - was and became

Tip

A tool like kdiff3 can help you to recover your previous translation.

Message Context

In more recently written parts we use a message context:

Special characters and other tips

Depending on the context a few characters have a special meaning and need some special treatment:

"#" (hash)

In English it is often used as abbreviation for "Number". You should replace it by "No.", "Nr." or whatever is common in your language.

"_" (underline)

In menu and dialog entries the following character will become the accelerator, mnemonic or hotkey, which can be used together with a superkey ctrl or alt to jump to the entry. While in GTK2 they have always been visible, in GTK3 they appear only after holding the superkey. More specific under Linux you reach a main menu entry with alt+<key> and its submenus and other menu entries with <key>. In dialogs always use alt+<key>.

The terminology is not unique here: while

msgfmt has a --check-accelerator option and

DocBook uses the <accel> tag for a letter used with a meta key and <shortcut> for a key combination, but

GTK+ distinguishes the underline marked character of the label as mnemonic and the hotkeys like F1 for Help or ctrl+c for Copy as accelerator.

So the key should

1. exist on a keybord for your language.
2. be easy to remember for your users,
3. be unique in its context and you should control it by #Running GnuCash with your file after #Compile & Install. See also Access Keys in Gnome's HIG about keyboard input.

wrong:

"do _this" # Hotkey: t

"do _that" # Hotkey: t => not directly reachable

right:

"do th_is" # Hotkey: i

"do th_at" # Hotkey: a

That is one of the reasons why you should run the program with your translation: to see duplicate accelerators.

Characters to avoid

In dialogs some are already used on buttons like in English: Close, Help. Others depend on the context.

Characters breaking the baseline like in latin script: j,p,q,y. At least in some fonts the underline becomes invisible - leaving the user clueless.

It is not required to use the same key as in English, Example from de.po:

#: gnucash/gnome-utils/gnc-main-window.c:273
msgid "_File"
msgstr "_Datei"

Languages are just different.

Some time ago it was also used in the headers of exported files

here it was used to link multiple words to one identifier together. Example:

#: ../src/import-export/csv-exp/csv-tree-export.c:155
msgid "full_name"
msgstr "Vollständige_Bezeichnung"

This is no longer in use.

"\" (backslash)

It is the escape character in many programming languags. The following character has a special meaning like e.g.:

"\n" (New line)

The most often used special character in our strings. If msgid contains "\n" keep the layout and add them to msgstr too - at the same places.

"some \"quoted\" text"

Because " terminates the messages, you must precede it by a backslash inside of the messages or use other quoting characters like:

• "some 'quoted' text"
• "some »quoted« text"
• "some „quoted” text"

You are free to use the conventions which are common or suggested in your language, but stay consistent. For that purpose you should add a translator comment about the convention at the beginning of the file for better cooperation.

Use "\\" to print a backslash.

"%" (percent)

In C based programming languages "%" marks the beginning of a format specifier, e.g. "%d6" means insert the next variable here in decimal format with 6 digits. Such format specifiers should be copied into your translated message, at the appropriate spot for your language, see https://www.boost.org/doc/libs/release/doc/html/date_time/date_time_io.html#date_time.format_flags Boost's list of format flags for date and time].

Non-ASCII digits

As a special feature for Farsi (Persian) and maybe Arabic, translators can insert an ‘I’ flag into numeric format directives. For example, the translation of "%d" can be "%Id". The effect of this flag, on systems with GNU libc, is that in the output, the ASCII digits are replaced with the ‘outdigits’ defined in the LC_CTYPE locale category. On other systems, the gettext function removes this flag, so that it has no effect.

Note

If a string is marked with c-format and has a % mark that does not start a format specifier, file a bugreport and tell the developers the location of the string (the lines above the msgid). The developers should fix this in the code. One way to do so is to insert a comment containing xgettext:no-c-format before the gettect call.

In order to continue without having to wait for the developers' fix to propagate you can remove the c-format flag from the #, comment line above. If no other flags are in the line, simply remove the line.

• To output "%" if a string contains format specifiers, use "%%" in your string.

Reordering parameters

Assume a string "In %d cases the result will be %d.", but in your language you would prefer to write "%d will be the result in %d cases." Now you would get the wrong numbers.

Solution

Insert the ordinal number of the parameter, followed by "$" in the format specifier: "%2$d will be the result in %1$d cases.".

"~" (tilde)

like "%", but for scheme-format. The basic scheme-format uses ~a or ~s to format subsequent variables within code and should be copied in the translated message, in the same order. Guile's (ice-9 format)^[1] does reordering with the ~@* and ~#* arguments, but it's a bit tricky to use:

(format #t "~@*1~a's ~@* from ~@*2~a to ~a" "Balance Sheet" "Yoyodyne Pty" "1 Oct 2018" "30 Sept 2019")

would print

Yoyodyne Pty's Balance Sheet from 1 Oct 2018 to 30 Sept 2019

Note

~a will insert a contents using "human readable" (display var) whereas ~s will insert contents using (write var). This is an important difference which means ~a and ~s cannot be interchanged.^[2]

"{num,optional other specifiers}"

this is a format specifier for C++ code. You cat either copy it verbatim somewhere in your translated message or you may adapt it to your language.

"&" (ampersand)

is the starting character of HTML encoding, which is used in some reports. E.g.

 

means NonBreakableSpace.

"<" (less)

is the starting charcter of tags in several markup languages. E.g.

<b>Text</b>

results in bold Text.

See also

GUI Guidelines is the related programmers view.

Almost Done

If you are almost done it becomes harder to find the last untranslated messages. Then you can use and then search your file for the content of the msgid.

Check syntax and statistics of your .po file

Required

msgfmt -c --statistics ${LL}.po

If that program reports one or more fatal errors for your language, you should review the criticized lines of your file.

Tip

A successful call will create a file messages.mo. If you are not using a build environment, you can move that file to

Linux

${PREFIX}/share/locale/${LL}/LC_MESSAGES/gnucash.mo

and restart gnucash to test the program with your translation.

Desired

In a second run you might wish to see, where you forgot to add an accelerator:

msgfmt -c --check-accelerators="_" --statistics ${LL}.po

The users will love you if you fix them, too.

Current status

To see some over all statistics how many strings are translated, you can run

for i in *.po; do echo -n "$i:"; msgfmt -c --statistics $i;done

in your po directory.

Priority

As you might have noticed, the po file for GnuCash is rather big by containing more than 4000 strings. It is somewhat helpful to look into different priorities for the different strings there. However, unfortunately the po file format doesn't enable any easy way for the GnuCash project to make the import strings differently from the less important ones. However, for a few files the developer team can give you some guidelines for the general priorities.

The source code location aka ref[erence] of a string gives you some hint about its priority. In particular, the following file suffixes or file locations imply a certain priority:

• High Priority: Strings from all *.glade files will be presented by the GnuCash user interface (UI) somewhere for the user. This may imply a somewhat higher priority to those strings - however, some UI elements are rarely used, so the actual location of the .glade file has an influence as well, but there isn't an easy rule for that anymore.

Tip

If you wish to see the string from a *.glade file in it's context, but don't know, where it is hidden in gnucash, if

• the gnucash source files and
• the Gnome's interface builder Glade

are installed on your system, you can preview them for instance with

LANG=C glade-previewer -f ${SOURCEDIR}/gnucash/gtkbuilder/${FILENAME}

^[1]

• Low Priority: Strings from all *.schemas.h files will not appear in the gnucash UI. Instead, they are shown only inside the

• Linux: dconf-editor,
• macOS: defaults or
• Windows: regedit program when the user wants to set particular GSettings keys of GnuCash. You can safely consider the .schemas.h strings with lower priority than the others.

• • Register2 feature is a stalled developement. The strings are only visible, if you #configure --enable-register2. Some, but not all strings are marked with a "Register2 feature" comment.

Unfortunately, there is no such simple rule for strings from *.c files or the single large intl-scm/guile-string.c file. The strings from there may be of higher or lower priority, but this isn't easily visible. We can only recommend to start GnuCash on your own with your updated translation, and then check for strings which you see but are not yet translated. Those are for sure of high priority.

Two additional source code locations can be noted as low priority:

• Everything from the file src/bin/gnucash-bin.c is of low priority because those are the command line options when running gnucash with different options from the command line. This is a use case that is performed only by highly experienced users which are accustomed to using the English-language command line commands. Therefore, translations here are of lower priority.
• Everything from the folder src/tax or from the intl-scm/guile-string.c file with a comment indicating some file in src/reports/locale-specific is related to tax preparation in the U.S. or in Germany. Hence, those strings are uninteresting for anyone living in different countries, and you can safely consider those with very low priority.

Testing and submitting your translations

You must check that your new translations are programatically correct (ie:

that there are no unclosed quotes, etc). To do this, use the msgfmt program

Above call will report most important errors in your .po file and must not fail, while the call below

msgfmt -c --check-accelerators="_" --statistics LL.po

whill additionally check if you missed some keyboard accellerators aka hotkeys.

Note for developers

Another python based tool is i18nspector - checking tool for gettext POT, PO and MO files. It is stricter and shows also warnings about expected entries which our .pot file is currently missing. That can be discussed e.g. in #Background.

If you want to see your translations within a running version of gnucash, simply place your .po file in the po/ directory of your local gnucash source repository (which you have previously installed) and a regenerate your message catalogs with:

Now you can run gnucash with your new translations:

To review the schema strings you can use 'dconf-editor'

Alternative Way with Poedit

If you use Poedit while working on .po file, you would notice that it saves file in .mo format, the very format that GnuCash uses itself. So one would just need to copy this LL.mo file into appropriate subdirectory of your build directory:

The only thing that needs to be changed here is <LL> which stands for your language code (ka Georgian, de German etc). The rest is as in above method:

Submitting

just push your commit (Git#Pull Requests) or upload the Git#Patches of the files. There should be one commit/patch containing the noise as described in #Update an existing .po file and a second one containing your actual work.

Then follow #How to submit changes directly to GnuCash. See also https://lists.gnucash.org/pipermail/gnucash-devel/2009-January/024700.html [FIXME: obsolete?]

Committers

• Did you get #The glossary file, too?
• Ideally #Updating an existing .po file
• Checks:
  • #Check_syntax_and_statistics_of_your_.po_file!

  Notify the statistics for the commit message.

  • The Python tool i18nspector finds many additional errors, particular bad header lines. But its language list is incomplete as it knows not many 3-letter-languages.
  • Some common mistakes:

msgid "translator-credits"

should contain at least the "Last-Translator:" from the header.

msgid "gnucash-icon"

do not translate, we have only one.

• If the language is new
  • #Adjust po/CMakeLists.txt already done?
• On committing add the name and email address of the last translator from the file as author, e.g.

   git commit --author="Lieutenant Worf <lt.worf@starfleet.org>" --message="L10N:tlh[: optional status or other details]
  
  4677 translated messages." # << The msgfmt statistics
  

• If you check in a new language, remove a language or see the status of the language changes from partial to (almost) complete, update the numbers in <sect2 id="oview-featuresintl2"> in file guide/C/ch_oview.xml of gnucash-docs.

Problems

Gtk-CRITICAL messages

Note: Fixing this problem is quite difficult. We keep the explanation here in case some developers need it in the future, but if you have no idea what we are talking about in the next sentences, you should rather ignore these Gtk-CRITICAL messages and our explanation here!

If you see any "Gtk-CRITICAL" messages while running gnucash, it is probably because you translated a string differently than how it exists in some other gnome library. You must discover which string you translated differently, and change the translation to exactly match that of the gnome libraries.

To do this, you need to run gnucash under gdb:

Then, from within gdb, issue

Eventually, gnucash should crash (because of the --g-fatal-warnings

directive), when it does, issue from within gdb You should see some output that looks like

Notice position #5 which has "gnc_mdi_tweak_menus at gnc-mdi-utils.c:574"? Open that source file and find line 574:

So, the problem is with the translation of "_View/_Toolbar". The "/" is a menu seperator, so you now know that the problem is with either the translation of "_View" or "_Toolbar". By switching to an English gnucash (LANG=C) and looking through your .po file, you should be able to find out the problem. Change the offending translation to whatever you see in the gnucash app. Remember that the translations must contain the proper underscores.

Watch File accesses

To follow gnucash as it access files

Check Files in Repo gnucash's doc Directory

Note

The content of this directory got some cleanup by bug 797111.

In theory one could create localized man pages (<command>.<man-section>[.in]). But their content is almost the same as <command> --help, which are translated for gnucash and gnucash-cli.

Task

We should use gettext also in the perl modules.

• If you add files add them to set(doc_DATA ...) in CMakeLists.txt.

Translating the GnuCash Guide and Help

Moved to Documentation Translation.

How to translate the files containing the new account hierarchies

This section describes the actions needed to translate the files containing the new account hierarchies.

Preliminary Considerations

However, please take a moment to think about the intention of the account hierarchy templates. The intention of those files is much more language-related than any other of the files inside gnucash. A string-by-string translation is not the best thing to do here. Instead, you can and should find out an actual recommended account structure which makes sense in your language, and implement that one in your language. By this, I mean several of the english accounts make sense only in the U.S., but probably not in other countries. Hence, your translated account template should not contain them. Also, you can add additional parts of the account templates for your language as well, if the users are likely to need it.

For example, in the U.S., users are likely to own a car, and for this reason there is an account structure template for "Car". If in another hypothetical region users are likely to own, say, a spaceship instead of a car, you should remove the "Car" template and instead create a new account structure that represents all accounts related to the ownership of a spaceship, and offer this as additional "Spaceship" template.

In other words, you should feel free to create a completely new account template structure that is most suited to your language. The english-language templates are just a proposal, but will need further adaption and not a string-by-string translation.

Having said that, here is how you would start for a direct translation of the English templates:

In this section always replace <locale> with your language code and optional your region code, if there are multiple countries with the same language and your templates are fitting only to one of them.

Prerequisite

• If not done before, #Get the source from Git.

Initialize accounts/<locale>

• If it does not already exists, execute the following steps to initialize your accounts/<locale> directory:

1. Copy the directory accounts/C to accounts/<locale>.

   Tip

   If there is already a directory in your language, but for a different region you can instead also copy that.

2. In the directory accounts/ change the file CMakeLists.txt and add your <locale> to both alphabetical sorted lists:

   1. add_subdirectory(C)
      :
      add_subdirectory(<locale>)
      :
      

   2. set(accounts_DIST ${C_DIST} ...  ${<locale>_DIST} ... ${dist_list} PARENT_SCOPE)
      

3. In accounts/<locale>/CMakeLists.txt adjust the <locale>:

   :
   set_dist_list(<locale>_DIST ${dist_account_DATA} CMakeLists.txt)
   
   install(FILES ${dist_account_DATA} DESTINATION ${ACCOUNTS_INSTALL_DIR}/<locale>)
   file(COPY ${dist_account_DATA} DESTINATION ${ACCOUNTS_BUILD_DIR}/<locale>)
   

   Note

   The next 2 steps are are discussed in #Localize the Account Charts below.

4. Localize acctchrt_full.gnucash-xea. This is only a helper file where you have all accounts in their context.
5. Now create the real modules by merging the respective parts from acctchrt_full.gnucash-xe in the other acctchrt_*.gnucash-xea files.

• If you remove or create new files, adjust in accounts/<locale>/CMakeLists.txt the list

  set(dist_account_DATA
    ...)
  

• Whenever you changed one or more CMakeLists.txt files, you have to rerun

  cd ${SOURCEDIR}
  cmake <your options>
  cd ${BUILDDIR} # e.g. .build
  make # or ninja
  

Localize the Account Charts

Tip: C/acctchrt_full.gnucash-xea is a helper file. Because we prefer modularization it usually is not part of the distribution. It contains the full tree of the personal en_US accounts. The other acctchrt_*.gnucash-xea files contain single branches of that. So after translating it you can copy&paste the respective parts in the other files to ensure consistency between them.

If you modularize the templates you should start with acctchrt_common.gnucash-xea - it is the most basic.

For each desired acctchrt_* file in that directory:

1. Change the gnc-act:title, gnc-act:short-description, and gnc-act:long-description to contain appropriately translated text. Do not add any newlines in the long description except at the end and begining of the string.
2. For each gnc:account in the file
   1. translate the act:name, and act:description fields.
   2. Optionally you can
      1. assign an account number <act:code>1234</act:code> after <act:commodity-scu> or
      2. add a note as i.e. in

            <act:slots>
             <slot>
               <slot:key>hidden</slot:key>
               <slot:value type="string">true</slot:value>
             </slot>
             <slot>
               <slot:key>notes</slot:key>
               <slot:value type="string">Some additional text about the usage of this account</slot:value>
             </slot>
             <slot>
               <slot:key>placeholder</slot:key>
               <slot:value type="string">true</slot:value>
             </slot>
           </act:slots>
         

   Please do not translate any other fields or the internally used ROOT account.

3. To avoid typos, run the Account Hierarchy Template#Syntax Check.
4. New files to be shown to the user must be added to the account_DATA section,

   helper files like acctchrt_full.gnucash-xea to EXTRA_DIST in Makefile.am.

Note again: You absolutely don't need to translate all of the files from accounts/C. A subset of those are fine as well. Probably several of them will not apply to your local legislative/economic system anyway. For a really customized account hierarchy you might better create a new account hierarchy file in GnuCash, and then, by hand-editing the xml code, split it up into several files and cut&paste the appropriate tags from the accounts/C/acctchrt_* files.

If you wish to add new accounts manually, you will need some additional guids, those funny random numbers. To get them you can use:

or use an online uuid generator like this one (any other one will do as well). Be sure to untick "Hyphens" to generate gnucash compatible guids. If you forget or the site you use doesn't offer that option, simply remove the hyphens yourself.

Dependencies

uuidgen is in a package 'util-linux', sed has its own package.

Account Hierarchy Template describes, how to create new templates e.g. for business purpose according local rules.

Test your Work

To test your work under real conditions, you should finally Compile & Install it. But before you need an adjusted Makefile.am in your accounts/<locale> directory. If none exists, copy that from accounts/c and adjust it:

• 1. Line (accountdir): adjust the locale.
• If you removed accountcharts, remove their line from account_DATA,
• if you added new files, insert lines with their names and "\" (the line continuation symbol).

How to create localized Income Tax Tables

Note

This section is under developement and mostly untested!

As of the beginning of 2015 there is an nice US tax module with a report and export in TXF format. Additional there is a small de_DE derivate for the monthly VAT declaration. you can compare them to see, how you can tweak them to get something else.

Tax Table

Because it is also used by Edit->Tax Report Optionsit is part of the GnuCash library:

1. Copy us into a new subfolder with the lowercased ISO code of your region.

   It contains the following files

   1. tax.scm - is only a linking element, where you have to replace us by your region twice.
   2. txf.scm - the tables, and
   3. txf-help.scm - the descriptive help strings for each TXF code. This is also used to get a table in gnucash-docs/help/
2. They have relative simple table structures:

   (define txf-tax-entity-types
   

   contains a list of forms for different entities (person, company …).

   (define txf-income-categories …
   (define txf-expense-categories …
   

   contain for each of the above lists the entries. If you compare this file with the respective files in de, you can see an example localization with additional categories:

    (define txf-asset-categories …
    (define txf-liab-eq-categories …
   

   It should be possible to adapt the lists for your tax forms.

Report and Export

Probably you need to have other export reports. That are in https://github.com/Gnucash/gnucash/tree/maint/gnucash/report/reports/locale-specific/us like

• txf-export.scm
• us.scm is unused

Here you might probably need some help from a programmer.

How to translate the website

Note about OS

These instructions are written for linux. They will probably work on other unix-like systems as well, but not on Windows. On Windows you may be able to do this if you set up a linux-like environment (with cygwin or MinGW[-w64]), but that's untested so far. Please report your findings here.

• Get a checkout of https://github.com/Gnucash/gnucash-htdocs
• Run the command

  make pot
  

• Then depending on whether or not a translation for you language exists already (complete or not):

  Existing translation

  
  Run the command

  msgmerge --previous -U po/LL.po po/gnucash-htdocs.pot
  

  where LL is your language code, see #Naming Convention above.

  Alternative

  make msgmerge
  

  will update all .po files

  New translation

  
  In the po directory run

  As translator

  msginit
  

  This will insert your name, email and locale settings into the new file. If that fails copy the newly created file po/gnucash-htdocs.pot to po/LL.po, where LL is your language code, see #Build a new .po file earlier.

  As maintainer

  # Set LL=<language code>
  msginit --no-translator --locale=$LL
  

  This will create a new file $LL.po without personal data. Continue with #Maintainers Task.

• Translate the po/LL.po file as described in #Translating the .po file.

  Priority

High

Startpage: {index|externals/*}.phtml

Low

sizing.phtml (outdated) search/templates/NMZ.* (unused)

Medium

the rest depends on you.

• Run

  msgfmt -c --statistics po/LL.po
  

  to see your success.
• Optionally run

  recode -d <input_encoding>..h0 po/LL.po
  

  to get special characters HTML quoted.
• Send your LL.po either as
  • GitHub Pull Request or
  • attachment of a Bugzilla enhancement request to the mainteiner team.

Background

This section was started to get some overview, work in progress! Beyond it helped to get rid of the outdated #IntlTool in version 2.7.6. For details see the GetText Manual.

Packages

In our build process we use beneath self written scripts the following packages:

• glib2-devel: glib-gettextize
• gettext, probably broken in:
  • -runtime: msgfmt, ...
  • -tools: (autopoint), gettextize, msg*, xgettext, ...
  • -runtime-tools-doc: manuals etc.
• (only up to 2.7.5) intltool: Intltool*

Our Build Process

This was the old (upto 2.6) autotools build process, which went through the following scripts:

autogen.sh

Note

Autotools were only used up to 2.6 branch. 2.7 and later use CMake instead.

glib-gettextize

helps to prepare a source package for being internationalized through gettext. It is a variant of the gettextize that ships with gettext.

glib-gettextize differs from gettextize in that it doesn't create an intl/ subdirectory and doesn't modify po/ChangeLog (note that newer versions of gettextize behave like this when called with the --no-changelog option).

»Note that on GNU systems, you don't need to link with libintl because the gettext library functions are already contained in GNU libc.« (glibc) [2]

configure.ac

• Sets

ALL_LINGUAS= ...

In recent versions it can be substituted by LINGUAS files in the po directories. We should consider this to distinguish TP vs. GC maintained translations.

GETTEXT_PACKAGE=gnucash

This is intltool style. Gettext uses PACKAGE=...

AC_SUBST(GETTEXT_PACKAGE)
AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE",
   [GetText version number])

AM_GNU_GETTEXT_REQUIRE_VERSION|AM_GNU_GETTEXT_VERSION(x.yy.zz) can be used to require a version. We should use it to avoid ...

• TP expects > 0.11.
• gnulib expects >= 0.17
• RHEL7 offers 0.18.2 (RHEL6 0.17)
• Debian Stable offers 0.18.1 and in backport 0.19.3
• Glade2 msgctxt and Glade3 were implemented in 0.18.3 - July 2013
• GSettings and Desktop entries are implemented in 0.19 - June 2014
• and got bugfixes until Version 0.19.3 - October 2014
• Scheme format strings got a fix in 0.19.4 - December 2014
• AppData support: gettext-0.19.6 released - 2015-09
•  ? custom XML formats in 0.19.7

<gjanssens> GtkUIManager files don't contain translatable strings as far as I know. They're not in POTFIILES.in either.

• at the time of our last update: gettext-0.19.8.1 released - 2016-06
• gjanssens sv->swedish patch for Windows is in gettext 0.20. It is also the first version , which extracts <developer_name> from appdata.xml. IRC log
• recent: GNU gettext 0.20.1 released - May 12, 2019

This setting then can be used by autoPoInt. Watch the caveaets from https://www.gnu.org/software/gnulib/manual/html_node/gettextize-and-autopoint.html:

On the other hand, if your package is not as concerned with compliance to the latest standards, but instead favors development on stable environments, the steps are:

1. Determine the oldest version of gettext that you intend to support during development (at this time, gnulib recommends going no older than version 0.17). Run autopoint (not gettextize) to copy infrastructure into place (newer versions of gettext will install the older infrastructure that you requested).
2. Invoke gnulib-tool, and import the gettext-h module. # Fixme: Meaning?

Regardless of which approach you used to get the infrastructure in place, the following steps must then be used to preserve that infrastructure (gnulib’s bootstrap script follows these rules):

1. When a script of yours run autopoint, invoke gnulib-tool afterwards.
2. When you invoke autoreconf after gnulib-tool, make sure to not invoke autopoint a second time, by setting the AUTOPOINT environment variable, like this:

$ env AUTOPOINT=true autoreconf --install

AM_GLIB_GNU_GETTEXT          # FIXME: Meaning?

• runs checks with settings
  • AC_PROG_INTLTOOL
  • AC_CHECK_HEADERS(ltdl.h, ...

dnl Make sure we have a proper gettext installed
AC_MSG_CHECKING(for a valid gettext/gmsgfmt installation)
if test "$gt_cv_have_gettext" != "yes" || test "x$GMSGFMT" = "x"; then
  AC_MSG_RESULT(no)
  AC_MSG_ERROR([Cannot find Glib Gettext.  Maybe you need to install the gettext package?])
else
  AC_MSG_RESULT(yes - $GMSGFMT)
fi

makefile.am

has the following section:

.PHONY: pot
pot: Makefile po/POTFILES.in
	rm -f po/$(PACKAGE).pot
	${MAKE} -C po $(PACKAGE).pot


$(srcdir)/po/POTFILES.in: make-gnucash-potfiles .potfiles
	if test -w $(srcdir)/po/POTFILES.in ; then ./make-gnucash-potfiles > $(srcdir)/po/POTFILES.in ; fi

# Creation rules so that po/gnucash.pot can always be created for
# make dist.
po/gnucash.pot: po/POTFILES.in
	${MAKE} -C po gnucash.pot

.potfiles:

make-gnucash-potfile.in

This is a self written perl script from the time as gettext had several issues. It creates po/potfiles.in, the "list of files which contain translatable strings". This script is not used in a cmake based build environment for gnucash. As gnucash 2.7.4 and more recent is cmake only, this file has been removed starting from that release.

xgettext

xgettext

Extract translatable strings from given input files. See --language for supported list:

--language=NAME

recognise the specified language (C, C++, ObjectiveC, PO, Shell, Python, Lisp, EmacsLisp, librep, Scheme, Smalltalk, Java, JavaProperties, C#, awk, YCP, Tcl, Perl, PHP, GCC-source, NXStringTable, RST, Glade, Lua, JavaScript, Vala, Desktop)

Options, which we should check:

--copyright-holder=STRING

set copyright holder in output

--foreign-user

omit FSF copyright in output for foreign user

--msgid-bugs-address=EMAIL@ADDRESS

set report address for msgid bugs